Products

Steel Kerb Vehicle Stopper Ideal for stopping cars, van and trucks from driving where they shouldn't. Good for car parks and trailer bays in logist...

Polymer Cable Hose Ramp  This is a 3-part ramp consisting of 2 non-slip polymer wedges and a highly visible footbridge. It has a bridge spacing of ...

Durable HGV Bumper The R300 is a small buffer with a large recess to take a washer if required. The recess is 19 x 5mm. Details: Dimensions: 40 x ...

Speed Bump Fixings The R301 fastener is an M16 x 125mm through bolt, perfect for fastening many of our products such as R103 Durable Speed Bump(300...

Product Code - R303   Dimensions: 180 x 112 x 35mm Weight: 0.3kg Custom moulding: Silicone 84273082

Product Code - R304   Dimensions: 117 x 114 x 34mm Weight: 0.2 kg

Product Code - R305   Dimensions: 120 x 90 x 68mm Weight: 0.2 kg Custom moulding: 87652575

Custom moulding Plug45 Chamfered Dimensions: 220 x 43 x 68mm Weight: 0.36 kg

Seat Bollard  The retaining component of a legacy system for fitting removable cushion seats in old buses and coaches Details: Dimensions: 57 x 33...

Scaffolding Plank Filler This part fills the gap caused by the upright standards coming up through the planks on elevated walkways. The cut out ...

Solid rubber block Used on garage lifting gear to act as a barrier between the vehicle and the crane. Details: Dimensions: 200 x 100 x 40mm Weight...

Solid Rubber Block  A solid rubber block used on garage lifting gear to act as a barrier between the vehicle and the crane. Details: Dimensions...

Moulded Rubber Washer A small custom moulded rubber washer. Details: Dimensions: 60 OD x 28.5 ID x 10mm thick Weight: 0.02 kg

Durable Front Plate The R317 is the UHMWPE front plate to the R019 Dock Bumper. Details: Dimensions: 410 x 210 x 35mm thick Weight: 2.5 kg

Heavy-duty Front Plate The UHMWPE front plate to the R020 Dock Bumper.  Details: Dimensions: 710 x 210 x 35mm thick Weight: 4.5 kg

Durable Rubber Sheet Sold in 12M lengths. Made from TyreCord, an extremely tough and resilient NAT/SBR rubber blended compound with fibre reinforce...

Rubber Matting Sold in 12M lengths. Made from TyreCord, an extremely tough and resilient NAT/SBR rubber blended compound with fibre reinforcement. ...

Roll-up Speed Bump A portable roll-up speed bump ideal for temporary road blocks or anywhere traffic speed needs to be reduced for a short time. Su...

Reflective Kerb Stopper The R324 is a competitively priced rubber kerb with 8 yellow chevrons attached for better visibility. This part can be fixe...

Rubber Mud Flap  The R326 Mud Flap is made from durable yet flexible rubber. It can be screen printed with a graphic of your design. The max pri...

Hose and Cable Ramp Accessory The R329 is the rubber wedge element that fits with the GRP grating to make Hose & Cable Ramp R234. Details: Dim...

Rubber Washer The R331 is a custom moulded soft rubber washer. AJA0664-1 Details: Dimensions: 28mm OD x 10mm ID x 10mm thick Weight: 0.05 kg

Custom Moulding It is sed on trailer tautliners to secure steel upright poles in place. CDR.1 Details: Dimensions: 89 x 47 x 45mm Weight: 0.12 kg

Rubber Matting The R333 is button matting sold by the roll. Details: Dimensions: 1200 wide x 10000mm long x 3mm thick Weight: 65 kg

Rubber Matting The R334 is fine fluted matting sold by the roll. Details: Dimensions: 1200 wide x 10000mm long x 3mm thick Weight: 50 kg

Durable Back Plate It is easier and quicker to replace damaged bumpers or studs fixed to a backplate compared to those fixed directly into concrete...

Durable Fixing A Zinc and yellow passivated, suitable for fixing parts R089 & R090. Details: Dimensions: Plastic plug 60mm, overall length 87m...

Rubber Extrusion A custom moulding rubber wall strip. Details: Dimensions: 150 x 25 x 3000mm Weight: 15 kg

Durable Custom Moulding A custom moulding which has been used to support a vehicle axle stand, max 10 ton weight limit. Details: Dimensions: 340 ...

Durable Fixing A through anchor stud ideal for fixing some of our larger Dock Bumpers directly into the concrete loading bay wall. Supplied with an...

Through Stud Fixing  The R341 is ideal for securing many of our products to good concrete. Details: Dimensions: M12 x 100mm Weight: 0.09 kg

Durable  Tipper Pad Designed and purpose-built as a rubbing pad on the chassis of tipping bodies. It helps reduce noise and prevent expensive damag...

Foam Edge Protector Ideal for protecting your workforce from sharp corners. It can be fixed with screws or nails ( with a washer ). Or if the su...

Reflective Foam Edge Ideal for protecting your workforce from sharp corners. It is supplied with 3M double-sided tape attached to the rear of the s...

Rubber Kerb Protection A 1.2m long with 2 fixing plates and used primarily in HGV parks and Distribution Centres to help prevent tractor units and ...

R348 Wall Guard – Flexible Protection for Your Walls The R348 Wall Guard is a versatile, one-piece moulding designed for effective wall protection ...

Reflective Kerb Protection A small competitively priced rubber kerb with 3 yellow chevrons on each 500mm side. Details: Dimensions: 550 x 150 x 10...

Durable Hose Ramp Cable Protector A steel hose ramp with a single channel. This is ideal for the protection of hoses and cables with a diameter of ...

Product Code - R351   Dimensions: 50mm OD x 26mm ID x 3mm thick Weight: 0.04 kg This M24 washer is slightly smaller than our standard M24 washer so...

Product Code - R356   Dimensions: 122mm dia Weight: 1 kg R356 Custom moulding Vehicle Lift Pad

Product Code - R357   Dimensions: 122mm dia Weight: 0.15 kg R357 Custom moulding Vehicle Lift Pad

Floor mounted Bicycle Rack The R362 Bike Rack is floor mounted and will accommodate 4 bicycles. The steel has a galvanised finish. The base is 2...

Wall-mounted Bike Rack A quality product competitively priced. The steel box section is 40 x 20mm (2mm wall thickness) Details: Dimensions: 335(h)...

Cast Bike Rack It has a flanged base for casting into concrete. Details: Dimensions: n/a Weight: 4kg Qty: 8 pieces only

Product Code - R365   Size: M24 x 200mm Weight: 0.6kg

Rubber Extrusion The R366 Extrusion is part of our extensive range of rubber extrusions. They are multi-purpose and are appropriate for a variety ...

Wheel Chock Accessory The R367 is an eyebolt used in our Wheel Chock R135.  Details: Dimensions: 200 mm long : 490mm ID eyebolt Weight: 0.13 kg

Zinc-plated Washer The R369 is a zinc-plated washer. Details: 45OD x 13.5mmID x 4mm thick Weight: 42g