Products

Modular Hose Ramp Block The R239 Hose and Cable Ramp is the rubber connector for the modular ramp system. It is designed to connect sections of ste...

Cable Protection Ramps The R240 Hose and Cable Ramp is the central steel bridge for the modular ramp system designed to accommodate larger diameter...

Steel Cable Protection Ramps Durable central steel bridge for the modular ramp system designed to accommodate larger diameter hoses up to a maximum...

Rubber Kerb Ramp Designed to allow cars and wheelchair users to access paved areas over kerbs approximately 100mm high. It is made of a high-qua...

Steel  Wheel Guide This pair of unscrewable wheel guides is galvanised and powder-coated yellow. Their wall thickness of 5 mm makes them a very dur...

Steel Wheel Guide This pair of bolt down wheel guides are galvanized and yellow powder coated. Their splayed ends increase the effectiveness of thi...

Steel  Wheel Guide This pair of bolt down wheel guides are galvanized and yellow powder coated. At only 200mm high they are ideal for use at logist...

Durable Wheel Guide This pair of 3 metre bolt down wheel guides are made from galvanized steel. Their splayed ends increase the effectiveness of th...

Durable Tipper Pad Designed and purpose-built as a rubbing pad on the chassis of tipping bodies. The rubber part is concave, max. thickness 26mm a...

Product Code - R249   Dimensions: M16 x 115 mm Weight: 0.32 kg

Product Code - R250   Dimensions: M16 x 160 mm Weight: 0.39 kg

Product Code - R251   Dimensions: M24 x 70 mm Weight: 0.35 kg

Product Code - R252#   Dimensions: M24 mm Weight: 0.1 kg

Product Code - R253   Dimensions: M24 x 90 mm Weight: 0.26 kg

Product Code - R254   Dimensions: 65 OD x 28 ID x 5 mm Weight: 0.1 kg Heavy duty washer with galvanised finish.

Product Code - R255   Dimensions: M24 x 100 mm Weight: 0.3 kg

Product Code - R256   Dimensions: M24 x 120 mm Weight: 0.33 kg

Product Code - R257   Dimensions: M24 x 150 mm Weight: 0.44kg

Product Code - R258   Dimensions: M24 x 300 mm Weight: 0.88 kg

R259 - Fixing   Dimensions: M24 x 1000 mm Weight: 2.9 kg

Product Code - R260   Dimensions: M8 x 100 mm Weight: 0.1 kg

Product Code - R261 Dimensions: M12 x 100 mm Weight: 0.13 kg This part comprises of a moulded sleeve of high quality rubber with a bonded brass nut...

Rubber HGV Bumper A large rubber bumper for light and heavy goods vehicles. Its material characteristics make it ideal for enduring impact. It is s...

Durable Dock Bumper Made from TyreCord compound (a blend of NAT/SBR rubber with synthetic fibres). It is extremely tough and much stronger than pla...

Hose and Cable Ramp Accessory Secure GRP grating. For use primarily with the pedestrian ramps. (R420) Details: Dimensions: 30 x 26 mm Weight: 0.01...

Durable Kerb Stopper Made from 114 diameter steel tube welded to 5 substantial fixing plates. Each of the 5 plates has 4 x 16mm dia holes. Use R301...

Loading Bay Accesory Made from TyreCord compound (a blend of NAT/SBR rubber with synthetic fibres). It is extremely tough and much stronger than pl...

Product Code - R270   Dimensions: 12 x 99 mm Weight: 0.09 kg

Product Code - R271   Dimensions: Incl. the sleeve 15 x 106mm Bolt size: M10 x 106mm Weight: 0.13 kg Requires 16mm drill bit

Product Code - R273   Dimensions: 690 x 690 x 50 mm Weight: 4 kg This kerb ramp is well suited to doorway access or kerbside access uses. It has a ...

Durable Wheel Chock Made from wear-resistant PU. It is tough but light weight so it can be easily carried by hand. Only available in high visibilit...

Durable Wheel Chock Made from wear-resistant PU. It is tough but light weight so it can be easily carried by hand. Only available in high visibilit...

Rubber Extrusion A large weighbridge extrusion to fill the gap around the weighbridge to stop debris from falling into the pit and to help prevent ...

Heavy-duty Extrusion A small weighbridge extrusion to fill the gap around the weighbridge to stop debris from falling into the pit and to help prev...

 Foam Edge Protector The R281 Foam Edge has a 20 x 8mm slot. The slot has a 3M self-adhesive strips attached for easy fixing. Details: Dimensions:...

Reflective Foam Edge The 1000 3 Quater Foam Edge has a right-angled slot with 3M self-adhesive tape for attachment. Details: Dimensions: 1000 x 40...

Reflective Foam Corner The slot has a 3M self-adhesive strip attached for easy fixing. The R283 Foam Edge has a 20 x 8mm slot. Details: Dimensions...

Foam Corner Guard The R284 Foam Edge is 40mm diameter with a 32mm flat base. The base has a 3M self-adhesive strip attached for easy fixing. Detail...

Foam Edge Protectors   The R285 Foam edge has a 60mm x 20mm section and is 1000mm long. The base has a 3M self-adhesive strip attached for easy fix...

Durable Fixing The R286 is used to secure the solid GRP top to part R298 which is a multiple hose ramp for 100mm max hoses/cables. Details: Dimens...

Durable Mud Flap Design to cover the entire width of the trailer. Made from TyreCord rubber compound these flaps are extremely tough and resilient....

Durable Front Plate The R288 is a rubber moulding to be used as a cheaper option to the R039 UHMWPE Front plate. Details: Dimensions: 750 x 250 x ...

Durable Rubber Matting A cheap option to keep your feet off cold concrete, ideal in front of workbenches. Details: Dimensions: 1500 x 900 x 13mm t...

Product Code - R290   Dimensions: M24 x 50 mm Weight: 0.27 kg

M16 Fixing A chemical fixing kit to be used where the concrete is not good enough to use mechanical anchor bolts. Details Dimensions: M16 x 170mm...

Heavy-duty Sheet Made from TyreCord, an extremely tough and resilient rubber compound. These sheets can be cut or stamped into mudflaps, gaskets, s...

Durable Rubber Sheet  The R293 Sheet is made from Commercial grade rubber. These sheets can be cut or stamped into mudflaps, gaskets, seals and man...

Dock Bumper Accessory The R294 is the rubber element of R019 UHMWPE Dock Bumper. Hole centres from each end are 100 + 250mm. Details: Dimensions: ...